Adapters Agitators Turbines Flasks Hi Vac Valves O-Rings Sleeves Stoppers Stopcock Plugs _Stirring Equipment Threaded Connectors Glass & Quartz Threading Test Equipment Glass Grinding Machinery Environmental Apparatus P.O. Box 67 700 Cedar Avenue Middlesex, NJ 08846 (800) 641-7940 (732) 356-1553 (732) 356-2569 - FAX Info@SciMac.com

• Item 316 S/S Stirrer Shafts Item 316 S/S Stirrer Shafts.

• Stirring Equipment Menu

• Stirrer Bearings • PTFE Agitators • PTFE Turbines • Stainless Steel Agitators & Turbines • PTFE Stirrer Blades • Stainless Steel Stirrer Blades • _Stirrer Shafts - Stainless Steel - Stirring Shaft Couplings - PTFE Sheathed Shafts - Glass • Stirring Motors ........ • Item 4020 Stirring Shaft, Stainless Steel, 10mm, with Flat Precision ground and polished 316 Stainless Steel stirring shaft for use with 10mm OD bearings. A machined flat section approximately half the length of the shaft provides ample locations for agitators with set screws. It can accept our 600, 610, Teflon agitators and turbines and 4050 & 4060 series of Stainless steel agitators. When used with the 2075 series of bearings, a lubricant-free-vacuum seal can be accomplished at speeds up to 500 r.p.m. SciMac  Part # Over All  Length mm Flat Section For Flask Capacity Price:  4020-09 330 100mm 250-1000 $84.00 4020-10 420 100mm 250-5000 $96.00 4020-11 445 200mm 250-5000 $108.00 4020-12 515 220mm 2000-12000 $126.00 4020-13 590 280mm 5000-22000 $144.00 4020-14 650 280mm 12000-22000 $168.00 ........ • Item 4025 Stirring Shaft, Stainless Steel, 10mm Same Precision ground and polished 316 Stainless Steel stirring shaft as the 4020 except the whole length of rod is completely round. SciMac  Part # Over All  Length mm For Flask Capacity Price: 4025-09 330 100 ml $90.00 4025-10 420 250-5000 $96.00 4025-11 445 250-5000 $102.00 4025-12 515 2000-12000 $120.00 4025-13 590 5000-22000 $138.00 4025-14 650 22000-50000 $156.00 ........ • Item 4030 Button Style Stirring Shaft, Stainless Steel, 10mm, with Flat Precision ground and polished 316 Stainless Steel stirring shaft for use with 10mm OD bearings. A machined flat section approximately half the length of the shaft provides ample locations for agitators with set screws. It can accept our 510, 520, 530 and 540 Teflon Banana blades or 600, 610, Teflon agitators and turbines and 4050 & 4060 series of Stainless steel agitators. When used with the 2075 series of bearings, a lubricant-free-vacuum seal can be accomplished at speeds up to 500 r.p.m. Replacement buttons available. SciMac  Part # Over All  Length mm Flat Section For Flask Capacity Price: 4030-00 330 80mm 250-1000 $102.00 4030-01 420 100mm 250-5000 $108.00 4030-02 445 200mm  250-5000 $114.00 4030-03 515 220mm  2000-12000 $132.00 4030-04 590 280mm  5000-22000 $150.00 4030-05 650 280mm  12000-22000 $174.00 ........ • Item 4035 Button Style Stirring Shaft, Stainless Steel, 10mm Same Precision ground and polished 316 Stainless Steel stirring shaft as the 4030 except the whole length of rod is round. SciMac  Part # Over All  Length mm For Flask Capacity Price: 4035-00 330 250-1000 $90.00 4035-01 420 250-5000 $96.00 4035-02 445 250-5000 $102.00 4035-03 515 2000-12000 $120.00 4035-04 590 5000-22000 $138.00 4035-05 650 12000-22000 $162.00 4035-06 750 $186.00 4035-07 850 $198.00 4035-08 965 $222.00 • Item 4033 Replacement Button Replacement stainless steel Button and screw for our stirrrer rods. SciMac  Part # Price: 4033-00 $12.00 ........ • 4040 Swivel Crescent Blade Stirring Shaft, Stainless Steel, 10mm Precision ground and polished 316 Stainless Steel stirring shaft. This shaft has a built in Stainless Steel crescent blade secured with a S/S pin enabling the blade to rotate 360 degrees on the shaft for easy insertion into the flask neck. An economical and secure solution for applications when 316 S/S is required. SciMac  Part # Shaft Length mm For Flask Capacity Blade Thickness Price: 4040-00 330 200-300 19 x 60 $90.00 4040-01 330 500-1000 19 x 75 $90.00 4040-02 445 2000-3000 20 x 110 $132.00 4040-03 445 3000-5000 21 x 130 $144.00 4040-04 515 12000-22000 21 x 130 $150.00 4040-05 590 12000-22000 21 x 130 $162.00 4040-06 650 12000-22000 21 x 130 $174.00 ........ • Item 4050 Agitator, Stainless Steel Stainless Steel agitator with 4-45 degree straight edge blades on a round hub, 10mm straight bore. Supplied with a 316 S/S set screw and Kel-F tipped set screw for positioning at various or multiple locations on the stirrer shaft. For use with a 4020-P 316 S/S stirrer shaft. SciMac  Part # OD mm ID mm Blade Thickness Price 1 Piece: Distributors Discount 4051 50 10 1/8" x 3/4" $149.00 $110.00 4052 75 10 1/8" x 3/4" $149.00 $110.00 4053 89 10 1/8" x 3/4" $169.00 $126.75 4054 102 10 1/8" x 3/4" $169.00 $126.75 4056 152 10 1/8" x 3/4" $189.00 $141.75 • Replacement Set Screws SciMac  Part # Material Type Price 1 Piece: 3 Pack 4058 316 S/S $3.55 $7.95 4059 316 S/S $5.75 $11.95 ........ • Item 4060 Turbine, Stainless Steel Stainless Steel impeller with 6-90 degree fins on a flat round disk made of 16 gauge 316 stainless steel. SciMac's stainless steel turbine is suitable for gas dispersion and liquid-liquid dispersion. Features include: Turbulent power number range: 4.5 - 6.2, Trailing vortices in single-phase flow, cavitations in gas-liquid flow. Blades can be hand bent gently to needed positions; center hub has a 10mm straight bore with a 316 S/S set screw and a Kel-F tipped set screw. Refer to style 4050 for replacement screws. SciMac  Part # OD mm ID mm Price 1 Piece: Distributors Discount 4060 50 10mm $149.00 $119.00 4061 75 10mm $149.00 $119.00 4062 89 10mm $158.00 $125.00 4063 102 10mm $169.00 $135.00