Scientific Machine (SciMac) is your source for High-Quality PTFE laboratory products

Thermometer Adapters

Thermometer & Thermocouple  Adapters- Standard Taper Joints

All PTFE adapter for use with a standard taper inner joint. PTFE cap with a set of compression PTFE Saddles with a Silicone O-rings inserted. The adapter will allow for placement of plain stem thermometers, gas inlet tubes or any type of tubing.  Compression nut allows for height adjustment of the thermometers and tubes having an OD between 6-7mm.  Comes with 4 PTFE saddle- O-rings and a Viton O-ring.  Replacement saddle O-rings are available.

7 Item(s)

Set Descending Direction
per page

List  Grid 

  • 6110 - 6210 - PTFE Saddle O-Rings - Inlet Adapters

    PTFE Saddle O-Rings for 870 Thermometer Adapters

    Starting at: $14.02

  • 6210 - PTFE Saddle O-Rings for 870 Thermometer Inlet Adapters

    Replacement Saddle O-Rings for 870-10 Thermometer Adapters

    Starting at: $14.02

  • 870 - Thermometer Inlet PTFE Adapter

    All PTFE adapter for use with a standard taper inner joint.

    Starting at: $10.55

  • 871 - Baffle Adapter, PTFE

    871 - Baffle Adapter, PTFE with Compression Fitting

    Starting at: $65.62

  • 875 - Thermocouple Adapters

    All PTFE Adapter with saddle O-Ring and solid PTFE Compression cap. Standard taper woven joint adapter allows for secure placement of thermocouples or electrodes. The PTFE cap works in conjunction with the inner O-Rings, allowing for height adjustment and complete PTFE purity. The saddle O-Ring has a 9.5mm ID with a silicone insert.

    Starting at: $25.03

  • 878 - Adapter, PTFE, Thermocouple, Thermometer for 1/4" OD Inlet

    PTFE Adapter for use with ¼” thermocouples, thermometers, or bleed tubes. Adapter has an outer O-Ring to form a tight grease free seal in a standard taper inner joint. Vertical adjustment is accomplished by the PTFE lined compression cap and the inner PTFE saddle O-Ring or Viton O-ring. Adapter design permits use of Keck clips (PN 4250).

    Starting at: $17.42

  • 879 - Adapter, PTFE, Thermometer, for 1/8" OD Inlet

    PTFE Adapter for use with ⅛" thermocouples, thermometers, or bleed tubes. Adapter has an outer O-Ring to form a tight grease free seal in a standard taper inner joint. Vertical adjustment is accomplished by the PTFE lined compression cap and the inner PTFE saddle O-Ring or Viton O-ring. Adapter design permits use of Keck clips (PN 4250).

    Starting at: $17.42

7 Item(s)

Set Descending Direction
per page

List  Grid